This free baby jellyfish amigurumi pattern makes a small, soft, sea themed toy with a round plush bell, curly and straight tentacles, and a playful ruffle border. It works up as a quick keychain, bag charm, or baby shower gift.
Handmade Free Crochet Baby Jellyfish Amigurumi Pattern for Playtime
This baby jellyfish amigurumi is a charming underwater friend with a round, plush body and gentle tentacles that add playful movement and texture. The finished piece feels smooth, squishy, and squeezable, which makes it a sweet gift for children, ocean lovers, or a baby shower present.
Size is easy to adjust. Lighter yarn and a smaller hook make a daintier jellyfish, while bulkier yarn and a bigger hook make a chunkier one.

The head is worked in rounds, the tentacles are long stitched curls, and tight stitches keep the stuffing from peeking through. A soft cotton blend is a good choice because it highlights the stitches clearly and feels pleasant to touch.
If you enjoy small projects, browse more free crochet patterns after this make. For a matching shower theme, these pink bow baby shower ideas are a lovely pairing.
Jump To
- 1. Handmade Free Crochet Baby Jellyfish Amigurumi Pattern for Playtime
- 2. Crochet Jellyfish Amigurumi Keychain Pattern
- 3. Pattern Notes
- 4. Skill Level
- 5. Materials
- 6. Measurements and Sizing
- 7. Gauge
- 8. Stitch Abbreviations
- 9. Special Stitches
- 10. The Crochet Pattern
- 11. Quick Beginner Overview
- 12. Tips
- 13. FAQs
- 14. Crochet Baby Jellyfish Amigurumi with Ruffle Details
Crochet Jellyfish Amigurumi Keychain Pattern
This crochet jellyfish amigurumi keychain pattern turns the same soft shape into a cheerful keychain, bag charm, or small toy. It is worked in one piece, with no sewing except for embroidery and attaching the keychain. The curly and straight tentacles are crocheted directly onto the head, so the toy stays sturdy and neat.

A ruffle border adds personality and character. You can personalize the yarn colors and add a cute face for extra charm. Because the project is small, it is a quick, satisfying make for a gift bag, market stall, or party favor.
Pattern Notes
Before you start, set a few working rules so the rounds stay even and the finish looks clean.
- Work in continuous spiral rounds. Do not join the rounds.
- Place a stitch marker in the last stitch of each round, then move it up at the end of every round.
- Attach all tentacles and the ruffle border as you go. This keeps sewing to a minimum.
- Insert the safety eyes before you close the head.
- Use a smaller hook than the yarn label recommends for neat, tight stitches.
- Stuff the jellyfish as you work.
- Embroider the face before assembly if that is easier for you.
Skill Level
The skill level is beginner. You only need single crochet, slip stitch, basic increases (inc), invisible decreases (dec), and the magic ring (MR). If those stitches are new to you, practice them on a small swatch first. The pattern is repetitive, so the rhythm becomes comfortable quickly.
Materials
Gather these materials before you begin. The pattern makes 1 jellyfish.
- Worsted or DK weight yarn in a main color, with light and dark shades for contrast or any favorite color
- Black yarn for the face
- Pink yarn for blush
- Yarn in the same shade for straight tentacles
- 3 mm crochet hook, or a size smaller than the yarn suggests for tight fabric
- 1 pair of 4 mm safety eyes
- Keychain blank or jump ring
- Stitch marker
- Fiberfill stuffing
- Yarn needle
- Scissors
The hook size is a guide. Choose a size smaller than the yarn suggests if you need a tighter fabric.
Measurements and Sizing
The finished jellyfish is approximately 5 to 7 cm (2 to 3 in) across the bell. The tentacles are about 5 to 7 cm (2 to 3 in) long. Size will vary depending on yarn, hook, and tension, and this size is perfect for keychains.
For a preemie or other small baby, keep tentacles 8 in or 22 cm or shorter to prevent a strangulation hazard. Measure the tentacles before giving the jellyfish to an infant. The 5 to 7 cm tentacles in this project are well within that limit.
Gauge
Gauge is not critical for this project, but the fabric must be tight so stuffing does not show. Use a hook well below the size on the yarn label, keep tension firm and even, and do not overstuff, because too much stuffing stretches the stitches apart.
Stuff until the shape is firm, then stop. A firm shape with soft, even filling looks better than a hard, overstuffed bell.
Stitch Abbreviations
Use this key as you read the rounds.
| Abbreviation | Meaning |
|---|---|
| MR | Magic ring |
| ch | Chain |
| sc | Single crochet |
| inc | Increase (2 sc in same stitch) |
| dec | Decrease (single crochet 2 stitches together) |
| sl st | Slip stitch |
| FLO | Front loop only |
| BLO | Back loop only |
| st or sts | Stitch or stitches |
Special Stitches
Invisible decrease: Insert the hook in the front loop of the next two stitches, yarn over, and pull through both loops (2 loops on hook). Yarn over and pull through the remaining loops. This decrease blends into the fabric better than a standard decrease.
Ruffle stitch: Work 3 sc in the next stitch to create the ruffle effect. When you repeat this around, the edge lifts and waves gently.
The Crochet Pattern
The pattern is organized into the jellyfish head, curly tentacles, straight tentacles, closing the body, the ruffle border, embroidery, and assembly. The head is worked with the main yarn and a 3 mm hook. Work the parts in order, and keep your stitch marker moving as you go.
Jellyfish Head
Use the main yarn and a 3 mm hook. Work in continuous rounds.

- Rnd 1: MR, ch 1 (does not count as st), 6 sc in MR. (6 sts)
- Rnd 2: Inc in each st around. (12 sts)
- Rnd 3: (Sc in next st, inc in next st) repeat around. (18 sts)
- Rnd 4: Sc in next st, inc in next st, (sc in next 2 sts, inc in next st) x5, sc in last st. (24 sts)
- Rnd 5: Sc in each st around. (24 sts)
- Rnds 6 to 9: Repeat Rnd 5 (sc in each st). (24 sts each round)
- Insert safety eyes between Rnds 6 and 7, spacing 3 sts apart.
- Rnd 10: (Sc in next st, invisible dec in next 2 sts) repeat 8 times. (16 sts)
- Stuff the head firmly with fiberfill.
- Rnd 11: Work in BLO only: (dec) around 8 times. (8 sts)
- Fasten off, leaving long tail for closing.
Place the safety eyes before closing the head while the back of the fabric can still be reached. Test the position first with pins or stitch markers, step back and look from the front, and count so both eyes sit on the same round with the same spacing.

Working Rnd 11 in back loops only leaves the front loops free for the tentacles worked next.

Curly Tentacles (Make 4, attach as you go)
Make 4 curly tentacles, attaching them as you go. Start in the front loop of the next stitch after finishing Rnd 11. A contrasting or darker shade is optional but adds nice definition.

- Sl st in FLO of next st, ch 12.
- Beginning in 2nd ch from hook, work 2 sc in each ch to the end (22 sc total), creating a curl.
- Sl st in FLO of next st, sl st in FLO of following st.
- Repeat steps 1 to 3 three more times to make 4 curly tentacles.
- After the last tentacle, sl st in next FLO to secure. Cut yarn, weave ends, and leave them inside the head.
Working 2 sc in each chain gives the strip more stitches than the foundation chain can hold in a straight line, so it coils naturally into a spiral. For a closer look at this technique, see this easy crochet jellyfish with curly tentacles.
Straight Tentacles (Make 4, attach between curly tentacles)
Make 4 straight tentacles in a contrast color, evenly spaced between the curly tentacles.
- Insert the hook in the slip stitch between curly tentacles, in a stitch between tentacle bases. Join the yarn with a sl st.
- Ch 12, fasten off leaving a tiny tail. Tighten the last ch to form a small knot, then trim the tail near the knot for a neat finish.
- Repeat so you have 4 straight tentacles, evenly spaced between curly tentacles.
- Using a yarn needle, pull all remaining yarn tails inside the head. Knot them together, trim, and hide them inside.
Close the Body
Thread the head long tail through the remaining 8 back loops of Rnd 11. Pull tight to close the hole, then bring the tail out the top of the head for attaching the keychain. This step gives the bell a clean, rounded finish.
Ruffle Border
Join the main shade yarn in any front loop of Rnd 10, just above the tentacles. Sl st to join in the FLO.
Repeat [3 sc in next FLO, sl st in next FLO] around until you have a full circle. After the last group of 3 sc, sl st to the starting stitch. Fasten off, leave a short tail, and weave in the end. The ruffle border is the playful detail that makes the jellyfish look ready to float.
Embroidery
For the smile, use black yarn or embroidery floss. Embroider a curved smile two rounds below the eyes. Bring the yarn from back to front, make a straight stitch about 2 stitches wide between the eyes, tack it down in the middle for a smile, then bring the yarn back out to the original hole.
Tie off the yarn tails at the back, trim, and hide them inside the head.
For blush, use pink yarn. Embroider short straight or tick lines just below the eyes. Make one or two stitches for each cheek, fasten off, and hide the ends in the body.
Assembly and Finished Size
Finish by hiding all loose yarn tails. Close the hole at the top of the head with the main yarn tail. Attach the keychain by threading the long yarn tail through the keychain or jump ring, securing it firmly with a stitch or two, knotting it, and hiding it inside the head.

The finished jellyfish measures approximately 5 to 7 cm across and 8 to 10 cm tall, tentacles included. Give the bell a final squeeze and shape it gently with your fingers.
Quick Beginner Overview
Here is the whole make in eight quick steps.
- Crochet the jellyfish head in continuous rounds with invisible decreases, stuffing as you go.
- Insert the safety eyes between rounds 6 and 7, before closing the head.
- Make 4 curly tentacles attaching directly into front loops.
- Make 4 straight tentacles in between each curly tentacle.
- Work the ruffle border in front loops with [3 sc, sl st].
- Embroider the smile and cheeks.
- Draw the tail through the top, attach it to the keychain ring, knot securely, and hide the end.
- Enjoy the finished jellyfish.
Tips
These small details make the finished jellyfish look neat and feel sturdy.
- Use a stitch marker so you never lose the last stitch of a round.
- Tighten the chains for neat, crisp tentacles.
- Keep the stuffing soft and distributed for a nice, round head.
- Vary tentacle length for different characters or sea creatures.
- Make multiples in fun colors for gifts or to sell.
Pull fiberfill apart into small, fluffy pieces before use. Stuff a little at a time and push each piece to the edges. Stuff as you go before the opening gets too small, and shape the piece as you stuff by rolling it between your hands to spread the filling evenly.
If the toy is for a baby under 3 years old, embroider the eyes with dark embroidery floss instead of using safety eyes. Embroidered eyes are much safer for that age group.
FAQs
How do I crochet a baby jellyfish amigurumi?
Start with a magic ring and work the head in continuous spiral rounds using single crochet, increases, and invisible decreases. After shaping the head, attach safety eyes, then crochet four curly tentacles and four straight tentacles directly onto the head. Finish with a ruffle border, embroidered face, and a keychain attachment.
What yarn and hook size are best for a baby jellyfish amigurumi?
Use worsted or DK weight yarn in your preferred colors, with a 3 mm crochet hook or a size smaller than the yarn label suggests. A smaller hook creates tight stitches that prevent stuffing from showing through. Cotton or cotton blend yarn is recommended for clear stitch definition and a soft feel.
How do I make curly tentacles for an amigurumi jellyfish?
To make curly tentacles, slip stitch into the front loop of a stitch, chain 12, then work 2 single crochets into each chain starting from the second chain from the hook. This creates a natural curl because the extra stitches force the yarn to coil. Repeat to make four curly tentacles, attaching them as you go.
How do I attach safety eyes to an amigurumi jellyfish?
Insert safety eyes between rounds 6 and 7 of the head, spacing them 3 stitches apart, before closing the piece. Test the position with pins or stitch markers first, and ensure both eyes are on the same round with equal spacing. For babies under 3 years old, embroider the eyes instead for safety.

Crochet Baby Jellyfish Amigurumi with Ruffle Details
This free baby jellyfish amigurumi pattern makes a small, soft, sea themed toy with a round plush bell, curly and straight tentacles, and a playful ruffle border. It works up as a quick keychain, bag charm, or baby shower gift.
- Yield: 1 jellyfish 1x
Ingredients
Materials
Worsted or DK weight yarn in main color, light and dark shades for contrast, or any favorite color
Black yarn, for face
Pink yarn, for blush
Yarn in same shade, for straight tentacles
3 mm Crochet hook, or size smaller than yarn suggests for tight fabric
1 pair 4 mm safety eyes
Keychain blank/jump ring
Stitch marker
Fiberfill stuffing
Yarn needle
Scissors
Instructions
Jellyfish Head
1-Using main yarn and 3 mm hook: Using main yarn and 3 mm hook: Rnd 1: MR, ch 1 (does not count as st), 6 sc in MR. (6 sts)
2-Rnd 2: Rnd 2: Inc in each st around. (12 sts)
3-Rnd 3: Rnd 3: (Sc in next st, inc in next st) repeat around. (18 sts)
4-Rnd 4: Rnd 4: Sc in next st, inc in next st, (sc in next 2 sts, inc in next st) x5, sc in last st. (24 sts)
5-Rnd 5: Rnd 5: Sc in each st around. (24 sts)
6-Rnds 6-9: Rnds 6-9: Repeat Rnd 5 (sc in each st). (24 sts each round)
7-Insert Safety Eyes (between Rnds 6 &: Insert Safety Eyes (between Rnds 6 & 7, spacing 3 sts apart).
8-Rnd 10: Rnd 10: (Sc in next st, invisible dec in next 2 sts) repeat 8 times. (16 sts)
9-Stuff the head firmly with fiberfill: Stuff the head firmly with fiberfill.
10-Rnd 11: Rnd 11: Work in BLO only: (dec) around 8 times. (8 sts)
11-Fasten off, leaving long tail for closing: Fasten off, leaving long tail for closing.
Curly Tentacles
12-Start in FLO of next st after: Start in FLO of next st after finishing Rnd 11 (use contrasting/darker shade if desired): Sl st in FLO of next st, ch 12.
13-Beginning in 2nd ch from hook, work: Beginning in 2nd ch from hook, work 2 sc in each ch to the end (22 sc total), creating a curl.
14-Sl st in FLO of next st,: Sl st in FLO of next st, sl st in FLO of following st.
15-Repeat steps 1-3 three more times to: Repeat steps 1-3 three more times to make 4 curly tentacles.
16-After last tentacle, sl st in next: After last tentacle, sl st in next FLO to secure.
17-Cut yarn, weave ends (leave them inside: Cut yarn, weave ends (leave them inside head).
Straight Tentacles
18-With contrast color: With contrast color: Insert hook in the slip stitch between curly tentacles (in a st between tentacle bases), join yarn with sl st.
19-Ch 12, fasten off leaving a tiny: Ch 12, fasten off leaving a tiny tail. Tighten last ch to form small knot; trim tail near knot for neat finish.
20-Repeat so that you have 4 straight: Repeat so that you have 4 straight tentacles, evenly spaced between curly tentacles.
21-Using yarn needle, pull all remaining yarn: Using yarn needle, pull all remaining yarn tails inside head; knot together, trim, and hide inside.
Close the Body
22-Thread the head’s long tail through remaining: Thread the head’s long tail through remaining 8 back loops (of Rnd 11). Pull tight to close the hole; bring tail out the top of head for attaching the keychain.
Ruffle Border
23-Join main shade yarn in any FLO: Join main shade yarn in any FLO of Rnd 10 (just above tentacles): Sl st to join in FLO.
24-[3 sc in next FLO, sl st: [3 sc in next FLO, sl st in next FLO] repeat around (should get a full circle).
25-After last group of 3 sc, sl: After last group of 3 sc, sl st to starting st.
26-Fasten off, leave a short tail and: Fasten off, leave a short tail and weave in the end.
Embroidery
27-Smile: Smile: Use black yarn or embroidery floss. Embroider a curved smile two rounds below the eyes.
28-Bring yarn from back to front, make: Bring yarn from back to front, make a straight stitch (about 2 sts wide) between the eyes, tack it down in the middle for a smile, then bring yarn back out to original hole.
29-Tie off yarn tails at back, trim: Tie off yarn tails at back, trim and hide inside head.
30-Blush: Blush: Use pink yarn. Embroider short straight or “tick” lines just below the eyes.
31-Make one or two stitches for each: Make one or two stitches for each cheek, fasten off and hide ends in body.
Assembly & Finished Size
32-Finish hiding all loose yarn tails: Finish hiding all loose yarn tails.
33-Close hole at top of head with: Close hole at top of head with the main yarn tail.
34-Attach keychain: Attach keychain: Thread long yarn tail through the keychain/jump ring. Secure firmly with a stitch or two, knot, and hide inside head.
35-Finished jellyfish measures approx: Finished jellyfish measures approx. 5-7 cm across and 8-10 cm tall, tentacles included.
Last Step:
Please leave a rating and comment letting us know how you liked this recipe! This helps our business to thrive and continue providing free, high-quality recipes for you.- Method: crochet






